Montag, 4 Jan 2010

Call for tester: VirtualBox 3.1.2 for FreeBSD #take 2

Howdy beat@ called few mins ago a secound CFT for the 3.1.2 release, unfortunaltely
we have updated the guest additions to a recent snapshot to fix a kernel module
problem but see self the mail and changelog from him here:

First of all thanks a lot for all the valuable feedback. We have updated
the ports to fix the reported problems:

– – virtualbox-ose-additions:
– Update to a more recent svn snapshot. The kernel module from 3.1.2
was not loadable.
– Adjust pkg-descr and COMMENT to make it clear what additions are
good for (Patch by dougb@)
– Install rc.d style start script to load the kernel module
– Add check if kernel sources are available
– Mark BROKEN on FreeBSD 6.x

– – virtualbox-ose-kmod:
– Install rc.d style start script to load the network related kernel
modules in correct order
– Mark BROKEN on FreeBSD 6.x

– – virtualbox-ose:
– Update pkg-message to reflect recent changes
– Add missing PulseAudio dependency

New version of the tarball is available here:
https://svn.bluelife.at/nightlies/virtualbox-port-r621.tar.gz

Virtualbox 3.1.2 no longer requires procfs. If no other program requires
/proc mounted you could remove /proc from /etc/fstab.

If you are using the kernel modules for bridged or host-only networking
please load the virtualbox kernel module via /boot/loader.conf:
vboxdrv_load=“YES“

Then remove vboxnetflt or vboxnetadp entries from /boot/loader.conf and
add this to /etc/rc.conf and reboot the machine afterwards:
vboxnet_enable=“YES“

If you install virtualbox-ose-additions on a FreeBSD guest add this to
/etc/rc.conf:
vboxguest_enable=“YES“

The vboxvideo_drv should be recognized by „Xorg -configure“. If not, use
something like this in your xorg.conf for the video card:
Section „Device“
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: „True“/“False“,
### <string>: „String“, <freq>: „<f> Hz/kHz/MHz“
### [arg]: arg optional
Identifier  „Card0“
Driver      „vboxvideo“
VendorName  „InnoTek Systemberatung GmbH“
BoardName   „VirtualBox Graphics Adapter“
BusID       „PCI:0:2:0“
EndSection

To use vboxmouse_drv please adjust the mouse section in your xorg.conf
like this:
Section „InputDevice“
Identifier  „Mouse0“
Driver      „vboxmouse“
EndSection

Thanks,
Beat, on behalf of the FreeBSD Vbox Team


4 Responses to “Call for tester: VirtualBox 3.1.2 for FreeBSD #take 2”

  1. Tweets die Call for tester: VirtualBox 3.1.2 for FreeBSD #take 2 | Martin Wilke erwähnt -- Topsy.com Says:

    […] Dieser Eintrag wurde auf Twitter von Dru Lavigne, Stefan Pauly erwähnt. Stefan Pauly sagte: I will test on Wednesday RT @bsdevents: Call for testers: VirtualBox 3.1.2 for FreeBSD: http://ow.ly/SFmm […]

  2. Miscelaneous FreeBSD Links (Updated) | FreeBSD - the unknown Giant Says:

    […] VirtualBox 3.1.2 for FreeBSD Call for testers. and here take #2 […]

  3. Mikel King Says:

    I am going to be repurposing a server to FreeBSD 8.x and am curious. Do I have to run X in order to run Virtualbox? Or can I roll this sort of how VMWare does ESX?

    Thanks,
    m!

  4. tahkun Says:

    I am using VirtualBox on VNC.

    I no ploblem VirtualBox when start.
    But I started GuestOS(WindowsXP).
    Popup window that MenuBar and screen of Black.
    few second, Window is closed and print this message.

    ###!!! ASSERTION: failed to deserialize/set exception: ‚NS_SUCCEEDED(rv)‘, file /usr/ports/emulators/virtualbox-ose/work/VirtualBox-3.1.2_OSE/src/libs/xpcom18a4/ipc/ipcd/extensions/dconnect/src/ipcDConnectService.cpp, line 2591
    Break: at file /usr/ports/emulators/virtualbox-ose/work/VirtualBox-3.1.2_OSE/src/libs/xpcom18a4/ipc/ipcd/extensions/dconnect/src/ipcDConnectService.cpp, line 2591
    ipcDConnectService Stats
    => number of worker threads: 1
    nsStringStats
    => mAllocCount: 192
    => mReallocCount: 15
    => mFreeCount: 192
    => mShareCount: 91
    => mAdoptCount: 10
    => mAdoptFreeCount: 10

    $ dmesg
    Copyright (c) 1992-2009 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
    FreeBSD is a registered trademark of The FreeBSD Foundation.
    FreeBSD 8.0-RELEASE-p2 #4: Sat Jan 9 08:47:07 JST 2010
    takao@brian.milkcup.jp:/usr/src/sys/i386/compile/BRIAN
    Timecounter „i8254“ frequency 1193182 Hz quality 0
    CPU: VIA Esther processor 1200MHz (1197.01-MHz 686-class CPU)
    Origin = „CentaurHauls“ Id = 0x6a9 Stepping = 9
    Features=0xa7c9bbff
    Features2=0x181
    VIA Padlock Features=0x3fcc
    real memory = 1055784960 (1006 MB)
    avail memory = 1023148032 (975 MB)
    ACPI APIC Table:
    ioapic0 irqs 0-23 on motherboard
    kbd1 at kbdmux0
    cryptosoft0: on motherboard
    padlock0: on motherboard
    acpi0: on motherboard
    acpi0: [ITHREAD]
    ACPI Error: Package List length (8) larger than NumElements count (2), truncat
    20090521 dsobject-590
    ACPI Error: Package List length (8) larger than NumElements count (2), truncat
    20090521 dsobject-590
    acpi0: Power Button (fixed)
    acpi0: reservation of 0, a0000 (3) failed
    acpi0: reservation of 100000, 3ede0000 (3) failed
    Timecounter „ACPI-fast“ frequency 3579545 Hz quality 1000
    acpi_timer0: port 0x408-0x40b on acpi0
    acpi_button0: on acpi0
    acpi_button1: on acpi0
    pcib0: port 0xcf8-0xcff on acpi0
    pci0: on pcib0
    pcib1: at device 1.0 on pci0
    pci1: on pcib1
    vgapci0: mem 0xf4000000-0xf7ffffff,0xfb000000-0xfbffff irq 16 at device 0.0 on pci1
    fwohci0: port 0xfc00-0xfc7f mem 0xfdfff000-0xfdfff7ff i 17 at device 13.0 on pci0
    fwohci0: [ITHREAD]
    fwohci0: OHCI version 1.10 (ROM=1)
    fwohci0: No. of Isochronous channels is 4.
    fwohci0: EUI64 00:40:63:50:00:09:bc:1a
    fwohci0: Phy 1394a available S400, 2 ports.
    fwohci0: Link S400, max_rec 2048 bytes.
    firewire0: on fwohci0
    dcons_crom0: on firewire0
    dcons_crom0: bus_addr 0x8ba240
    fwe0: on firewire0
    if_fwe0: Fake Ethernet address: 02:40:63:09:bc:1a
    fwe0: Ethernet address: 02:40:63:09:bc:1a
    fwip0: on firewire0
    fwip0: Firewire address: 00:40:63:50:00:09:bc:1a @ 0xfffe00000000, S400, maxre2048
    fwohci0: Initiate bus reset
    fwohci0: fwohci_intr_core: BUS reset
    fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mod
    vge0: port 0xf800-0xf8ff mem 0xfdffe000-0xfde0ff irq 18 at device 14.0 on pci0
    miibus0: on vge0
    ciphy0: PHY 1 on miibus0
    ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-X, auto
    vge0: Ethernet address: 00:40:63:ee:99:89
    vge0: [ITHREAD]
    atapci0: port 0xf400-0xf407,0xf000-0xf003,0xec00xec07,0xe800-0xe803,0xe400-0xe40f,0xe000-0xe0ff irq 20 at device 15.0 on pci0
    atapci0: [ITHREAD]
    ata2: on atapci0
    ata2: [ITHREAD]
    ata3: on atapci0
    ata3: [ITHREAD]
    atapci1: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x370xdc00-0xdc0f at device 15.1 on pci0
    ata0: on atapci1
    ata0: [ITHREAD]
    ata1: on atapci1
    ata1: [ITHREAD]
    uhci0: port 0xd800-0xd81f irq 21 at device 16.0 onci0
    uhci0: [ITHREAD]
    uhci0: LegSup = 0x0010
    usbus0: on uhci0
    uhci1: port 0xd400-0xd41f irq 21 at device 16.1 onci0
    uhci1: [ITHREAD]
    uhci1: LegSup = 0x0010
    usbus1: on uhci1
    uhci2: port 0xd000-0xd01f irq 21 at device 16.2 onci0
    uhci2: [ITHREAD]
    uhci2: LegSup = 0x0010
    usbus2: on uhci2
    ehci0: mem 0xfdffd000-0xfdffd0ff irq 21 at deve 16.4 on pci0
    ehci0: [ITHREAD]
    usbus3: EHCI version 1.0
    usbus3: on ehci0
    isab0: at device 17.0 on pci0
    isa0: on isab0
    pci0: at device 17.5 (no driver attached)
    ahc0: port 0xc000-0xc0ff mem 0xfdffc000-0xfdcfff irq 17 at device 20.0 on pci0
    ahc0: [ITHREAD]
    aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
    acpi_tz0: on acpi0
    atrtc0: port 0x70-0x73 irq 8 on acpi0
    uart0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
    uart0: [FILTER]
    uart0: console (9600,n,8,1)
    uart1: port 0x2f8-0x2ff irq 3 on acpi0
    uart1: [FILTER]
    cpu0: on acpi0
    acpi_perf0: on cpu0
    p4tcc0: on cpu0
    pmtimer0 on isa0
    orm0: at iomem 0xd0000-0xd07ff,0xd1000-0xd1fff pnpid ORM0000n isa0
    sc0: at flags 0x100 on isa0
    sc0: VGA
    vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    atkbdc0: at port 0x60,0x64 on isa0

Leave a Reply